-
UNO
UNO is standard chamber for microscopy. The Stage Top Chambers fits in the XY stage or Piezo insert of the microscope, connects to Okolab Temperature, Gas and Humidity Controllers and creates the proper environment for live cell imaging right on the microscope stage.
This tutorial illustrates the key features of UNO ☞ https://youtu.be/c53B9xLcr0c
This tutorial illustrates the key features of the Stage Top Incubator and compares BOLD LINE vs UNO ☞ https://youtu.be/3cI7hbqTHPk
Feature- Temperature Range: from 3°C above ambient to 60°C
- Temperature Accuracy: ± 0.1°C in sample feedback mode, ± 0.3°C in chamber feedback mode
- Chambers available for any XY stage / piezo insert
- Embedded temperature sensor in heated glass lid and in chamber body
- Interchangeable magnetic inserts allow to host Petri, Slides and MW Plates
- Magnetic locks hold the Petri, the Slides and the MW Plates in the correct position inside the chamber
- Perfusion holes available for inlet and outlet of tubes
- Sliding lid allows easy access to the sample
- Optional lids are available for Koehler Illumination, laser safety and injection during imaging
BrochureGo to Website -
-
Bold - Tabletop
UNO is smart chamber for microscopy. The Stage Top Chambers fits in the XY stage or Piezo insert of the microscope, connects to Okolab Temperature, Gas and Humidity Controllers and creates the proper environment for live cell imaging right on the microscope stage.
This tutorial compares the Cage Incubator and the Stage Top Incubator and provides a selection criteria between the two ☞ https://youtu.be/VVj8KgFZbtE
Feature- Temperature Range: from 3°C above ambient to 60°C
- Temperature Accuracy: ± 0.1°C in sample feedback mode, ± 0.3°C in chamber feedback mode
- Chambers available for any XY stage / piezo insert
- Embedded temperature sensor in heated glass lid and in chamber body
- Interchangeable magnetic inserts allow to host Petri, Slides and MW Plates
- Magnetic locks hold the Petri, the Slides and the MW Plates in the correct position inside the chamber
- Perfusion holes available for inlet and outlet of tubes
- Sliding lid allows easy access to the sample
- Optional lids are available for Koehler Illumination, laser safety and injection during imaging
BrochureGo to Website -
-
Bold - Cage incubator
The microscope enclosure creates a large volume around the microscope in which temperature is controlled by recirculating warm air. It is made of polycarbonate panels and encloses microscope stage, nosepiece and objectives. It doesn't affect focus stability. All electronics including EMCCDs, spinning disk confocal etc. are left outside of the enclosure avoiding exposure to 37°C.
The enclosure closely follows the microscope profile and is supported by posts resting on the vibration isolation table.
Feature- Temperature range: from 3°C above ambient to 45°C
- Temperature accuracy on sample: 0.1°C
- Models for any inverted / upright microscope
- Sliding doors on the front and side panels allow full and easy access to the microscope
- Removable front panel with turn-to-open hinges
- Optional black panels for imaging in dark environment- can be added at any time after purchase
- An LED light with foot pedal and dimmer allows illumination inside the enclosure
- CO2 (and / or O2) levels set with Digital (Bold Line) or Manual Gas Controllers
BrochureGo to Website -
